When operating the appliance with semi-permanent installation, it is advisable to leave a door slightly ajar (even only 1cm), to ensure free circulation of air.In this case it will be necessary to: Drill a hole in a perimeter wall or in a window pane. 9.MAX 45, 3' MAX 115 cm12 ' 30 cmMIN 19, 7' MIN 50 cm12 ' 30 cm9 7When the hose (14) is not connected, the hole can be closed off with the flange stopper (13). Fix the hose (14) in the housing at the rear of the appliance (fig 1) Fit the end of the hose to the flange (15) as shown in fig. 5), adjust the total length according to your needs then, fit the bracket with the relevant nuts, close the door and connect the hose (fig.Ħ).5468pac160 GB10:19Pagina 9AIR CONDITIONING WITH SEMI-PERMANENT INSTALLATIONIf desired, Pinguino can also be installed on a semi-permanent basis fig. If you have a sliding door, use the additional set provided in order to extend the accessory to the desired length joining the two parts (fig. Position the hole of the bracket to allow a correct installation of the exhaust hose (see the following instructions).

Thanks to the wing nut, it's possible to use the window bracket also for sliding windows.

In Pinguino, a small part of this air is used to cool the refrigerant gas before, hot and moist, being discharged outside. The hot air in your room is passed through a coil cooled by refrigerant gas, losing excess heat and moisture before being discharged again into the room. One advantage of portable air conditioning units over fitted models is that they can be moved from one room to another in the home or even transferred between different buildings. › ▲▲▲ Manual Pinguino Pac C110 ▲▲▲Īn air conditioner removes moisture and heat from the room where it is located.

Delonghi pac c110 manual